Tuesday 8 October 2024

Three Stops At Stotfold

While I had some internal argument with myself about going to the Bedfordshire Steam Rally recently, there was never any doubt that I'd go to Stotfold Working Steam Weekend if at all possible. Although it's fairly small it's my favourite steam event of the year. The only problem was whether I'd find anything new to put on the blog. Here are three exhibits that tempted me to linger.


The Biggest Little Sawmill

One corner of the showground is set aside for steam-driven sawmills:



First you need to select your log and move it into position using a steam crane. The beauty of this show is that you see many of the machines being used for their original purpose.



Then you need to build up a head of steam in this engine which is going to power one of the sawmill set-ups. You'll notice that it has no cab or place for the driver; that's because it's the old type of "stationary engine". That's a slight misnomer as it was obviously mobile, but needed to be pulled around by a team of horses, or these days probably another engine.



And here's the mighty steam bandsaw, which could produce boards and beams from very large lumps of wood. On the side it says "Hadrian W. Spooner & Sons" which sounds like an excellent name for a nineteenth-century entrepreneur. When I got home I Googled "Hadrian Spooner" - I mean, there can't be many folk about with that name. 



Far from being a Victorian gent he turns out to be a very alive TV personality who has appeared on Scrapheap ChallengeThe Biggest Little Railway In The World and other shows which highlighted his eccentric engineering expertise. I'm fairly certain he's the man in the white T-shirt in the above photos.



Meanwhile the crane is moving another log for a different saw. But I found myself more drawn to a smaller arrangement....



Meet "Steady Eddie" and his steam-powered saw-bench. As you can see he's utilising a small model steam engine to run his saw. It just shows you how much power can be generated by such tiny machines. But it's time to move on....


Another Mini Machine


Here's a charming little model of a thrashing machine. Its full-sized cousins were widely used on farms to separate the grain from the straw and chaff before the advent of the combine harvester. There's a sign to tell you its story:



                "This is a fully working, 3 inch to the foot ( 1/4 size ), model of a
                Ransomes, Sims & Jefferies AM54 Medium thrashing machine.
                     It was built over a period of about 12 months, starting from
                purchased drawings. However, it soon became apparent that the
                drawings were both inaccurate and lacking in detail & so were
                abandoned. The model was finished by studying pictures, books & the
                internet, as well as climbing over a full-size machine living nearby.
                    All castings ( nearly 200 ) were home cast from patterns produced
                by 3D printing."



And this is the little engine that powers the model (and, I presume, that's the man who built it). Although it's small, and although there are demonstrations by restored, full-size thrashing machines at most shows, I think this serves a vital educational purpose. The real things are noisy, dusty and too big to take in easily from a single vantage point, especially for little people. This one is an ideal teaching resource. It can get very cluttered and confusing around a real thrashing machine....



See what I mean?


Memories Of Monty

There are also some exhibits which have no connection to steam. Most of these shows attract a few old military vehicles....



Impressive though some are, I rarely photograph them. Not very colourful and just not something which attracts me. And this small, wooden caravan would never have caught my eye had Les not been involved in protracted negotiations about the price of a jacket.



It's not even the original, just a replica of one which is kept at the Imperial War Museum in nearby Duxford. It was first used by General Annibale "Electric Whiskers" Bergonzoli of the Italian army. But it was stolen (or in army-speak "liberated") at the battle of Beda Fomm in Libya.



It was later used as living accommodation for General Montgomery when commanding the 8th Army's desert campaign. Churchill even stayed in it when visiting Monty. When another caravan was captured, the original of this one was then used as Montgomery's office.



And here comes Les. It turned out that they didn't have the jacket in his size anyway!


Take care.


19 comments:

  1. This is a real walk through living history, John, and quite fascinating. Sorry that they didn’t have a jacket to fit Les but his haggling slowed you down - all to the good. He can find a jacket elsewhere!

    ReplyDelete
  2. The mini machine is amazing - made using 3D printing sounds quite clever - a modern way to make something old.
    Army vehicles are interesting too - so I'm glad you took the photos!

    ReplyDelete
  3. Amazing the machines that do the job but look so dangerous! You would have to watch your fingers while operating these large (and small) contraptions!

    ReplyDelete
  4. Thanks for the amazing look at these machines and life back then. I can’t help but wonder how many people were injured or killed operating them. You can imagine how thrilled people were to have them however!

    ReplyDelete
  5. So glad you went to this show, and captured some of the exciting saws and machines in action. I dare say there might have been some whine as the blades hit the logs...just a guess. Maybe that's just from modern saws from my memory.

    ReplyDelete
  6. I enjoyed seeing these, and would have liked to be there in person. I always think back to that Skinner's museum Roger and I happened on...you would not believe all the stuff there. It is just one man and he had stuff so crammed together it was hard to see it all, and for sure couldn't get pics of. Of course none of it was being used, but he used to have some of them set up and working, but he said people didn't come to it so he quit.

    ReplyDelete
  7. These machines are huge! It surely was a dangerous job operating with them.

    ReplyDelete
  8. Those sawmills look so dangerous but they sure did the job.I like seeing the small machines, John.

    ReplyDelete
  9. You had to be very experienced to operate any of those sawmills. Amazing machines they all are. Thanks, John for showing them.

    ReplyDelete
  10. I am so glad you went - and took us with you. That would be an amazing sight, though I suspect very, very noisy. I love the miniatures.

    ReplyDelete
    Replies
    1. Not particularly noisy, but smoky at times. Actually the noisiest things are the fairground organs.

      Delete
  11. They made the most of steam technology. It's interesting to watch.

    ReplyDelete
  12. It is an amazing thing to see those machines operating! But for all of that, the thing that enthralls me, really, is those miniatures. How wonderful to be able to see exactly what "makes them tick". That is a labor of love, building one of those models.

    ReplyDelete
  13. All impressive and amazing but the model threshing machine and its story captured my attention most.

    ReplyDelete
  14. Glad to read you're getting out and about. You show us such marvels of times passed by.

    ReplyDelete
  15. It is lovely to sit back and be taken around your latest foray. Steam driven machinery is fascinating, though I have a feeling, if they have have to make their way under their own steam, the roads must take a beating.

    ReplyDelete
  16. Unas imágenes que evidencia esa actividad.
    Me ha gustado tu reportaje.

    ReplyDelete
  17. A lovely post John, such glorious machines, particularly the mighty steam bandshaw. I love the mini thrashing machine.

    ReplyDelete

Thanks for taking the time to comment. I'll try to answer any questions via a comment or e-mail within the next day or two (no hard questions, please!).